Follow these steps to install your Camovue Talon Pro camera, ensuring it's properly positioned for optimal monitoring and network connectivity.
Step 1: Install the camera
Put the strap through the mounting slot and strap the camera to a tree.
The recommended height is 1-1.5m, which is basically the same height as the monitored animal.
Note: You can adjust the camera according to the height of the monitored target.
*It's recommended that there are no leaves, branches, or tall grass obstructing the camera's view, or light sources shining directly into the lens.
Step 2: Confirm the operating status
Turn on the power switch, observe the signal indicator and the power indicator to ensure that the device is connected to the network successfully and has sufficient power. You may refer to Introduction to Camovue Talon Pro Indicator Light Meaning to understand the meaning of the signal indicator and the power indicator.
Step 3: Testing
There is a TEST button inside the camera body, which allows you to check if the camera has successfully detected an alarm. For detailed instructions, refer to: How to Use Camovue Test Feature.
Confirming the correct installation location, network connection, and battery status is essential for ensuring the proper functionality of your camera. For any issues or additional support, feel free to click "Submit a Request" below to reach out to Camovue Support.
Comments
0 comments
Article is closed for comments.