How to Reset Camovue Talon Pro

The following steps guide you through the simple process of resetting your Camovue Talon Pro camera to reset the camera to factory default settings. Whether you're troubleshooting or preparing to set up your camera again, this easy method will help you get back on track quickly.

Important Note: Resetting the camera will not unbind the camera from your Camovue account. To unbind the camera, please delete it via the Camovue App. How to Delete/Unbind Camera from Camovue Account

Step 1. Find the Reset/Test Button

Gently slide the back cover lock on the side of the camera to release the back cover and open the casing of the camera. Then you will find the TEST button.

Step 2. Press the Test Button

Press and hold the Test button for 5 seconds and you hear a short melody, indicating that the reset was successful and all the settings of the camera will be set to default. 

Note: Please make sure the camera is powered on (the power indicator light is green) when you reset the camera.

Once you hear the "Welcome to Camovue, please start the Camue App and the QR code on the camera" prompt, the camera will begin the initialization process, and you can proceed with setting up the camera. How to Initially Set up Camovue Talon Pro

By following these simple steps, you can easily reset your Camovue Talon Pro camera to its factory default settings. This process is helpful for troubleshooting or when you're preparing to set up the camera again. Just remember to unbind the camera from your Camovue account via the app if necessary. After the reset, the camera will be ready for a fresh setup and reconfiguration.

Should you have any inquiries or require further assistance, please click on "Submit a Request" below to contact our Camovue Support team.